Xantrex Automatic Generator Manual de usuario Pagina 108

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 124
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 107
Relay Timing
C–2 975-0082-01-01
RunMode
For generators with RunMode starting types (Types 7 and 8):
Relay 1 (RunStop relay) can be used for two-wire configured
generators.
Relay 1 (RunStop) and Relay 2 (Start) can be used with a common
ground for three-wire configured generators.
The Preheat will never overlap the Crank Time.
The “Delay” refers to the “Preheat to Crank Delay” and may be zero.
Cranking will cease when the generator run signal goes high for the
specified hold time or when the crank time has elapsed.
Figure C-1
RunMode timing diagram
Stop
Run
Start
Crank
Time
Preheat
Relay1: Run/Stop (Ignition)
Relay2: Start (Cranking)
Relay3: Preheat (Glow)
Vista de pagina 107
1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 123 124

Comentarios a estos manuales

Sin comentarios