Xantrex RC/GS RC7 Manual de usuario descargar pdf (Pagina 19)

Installing the RC/GS and RC7

975-0210-01-01 7

Choosing a location

Choose a location that is easily accessible. The RC/GS and

RC7 should be mounted where they are clearly visible, with

unobstructed access to the screen and buttons.

The location should be indoors, dry, and free from corrosive

or explosive fumes.

Mounting and Connecting

To install the remote:

1. Refer to Figure 2-1 for hole and cutout dimensions or

install the remote in a standard double-gang outlet box.

2. Pilot-drill the mounting holes (if necessary, depending on

your mounting surface) and, using a jigsaw, cut out the

hole in which the remote will be inserted.

WARNING: Fire hazard

The RC/GS and RC7 are not ignition protected. Do not install in

areas requiring ignition-protected equipment.

WARNING: Shock hazard

Before making an opening in a wall, bulkhead, or panel, ensure

there is no wiring or other obstruction within the wall.

Figure 2-1

Installation Dimensions

CUT OUT THIS AREA

PHON E

JACK

4-1/8"

5-3/16" c-c

4-1/4" c-c

FRONT VIEW

RC-GS_manual.book Page 7 Thursday, May 26, 2005 4:58 PM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 67 68

Sin comentarios

Xantrex RC/GS RC7 Manual de usuario Pagina 19